Li-ion battery storage system POWER SAFE, XXL, with fire protection

Product description

• The fire-rated solution for the safe operation of battery storage systems.
• With classified fire protection from the inside and outside and therefore suitable for installation directly at the external wall of neighbouring buildings.
• Integrated powerful storage system for very fast energy storage and release, optimised for permanent use in industry and commerce.
• Individual adaptability to the required storage needs.
• Tested, single-piece spill pallet with easily removable hot-dip galvanised grids (load capacity: 1000 kg / m²).
• Fire protection panels with high insulation properties (thickness 100 mm, A class material, non-combustible).
• Lockable, self-closing EI₂ 90-C fire-rated doors in accordance with EN 13501-2, tested in accordance with EN 1634-1
• Surveillance and lighting technology - optionally also available with outdoor motion detector.
• Structural analysis: to Eurocode 3 (DIN EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m²

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².

Roof drainage

Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.