Hazardous materials store BS 2K 60

Product description

• National technical approval from the Deutsches Institut für Bautechnik (DIBt), Berlin, applied for
• Suitable for the storage of liquids in all water hazard classes
• Sturdy steel profile construction in welded design, delivered fully assembled, ready for floor anchoring
• Excellent price-performance ratio thanks to consistent standardisation
• Galvanised components with 2 layers of paint give long lasting protection
• With integrated steel spill pallet, thickness 3 mm
• Storage levels with removable, hot dip galvanised grids (shelf loads: up to 12.5 kg/m²)
• Sealing tested in accordance with EN ISO 3452-1 with factory test certificate
• 100 mm ground clearance, accessible with lifting equipment
• Foot plates for secure anchoring to the foundations (mounting kit included)
• Crane eyes can be optionally supplied for easier unloading, installation and any subsequent relocation
• Spill pallet inserts in plastic (PE) are available as an option for storing aggressive liquids

Structural analysis

The statics calculations for the technical room system are based on Eurocode 3 (DIN EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.39 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to DIN 4149, EN 1998-1:2004.

Guidelines for storing flammable liquids

(flash point ≤ 60 ° C, classes H226, H225 and H224)

• Observe distance from fire loads (mostly min. 10 m)
• Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
• Country-specific requirements for air exchange rate
• Specifications in accordance with HSG71
• Specifications in accordance with ATEX Directive 2014/34/EU