Dehmer Strasse 58-66
32549 Bad Oeynhausen
br>Tel.: +49 5731753-0
Email: info@denios.ie
Internet: www.denios.ie
Hazmat store SolidMaxx CH 2.1
Item number: 274680W
- For the storage of drums and IBCs on a small footprint for access close to production.
- Approved for storage of water-polluting and flammable substances.
- Steel frames and spill pallet are powder coated (RAL 7043, black-grey). The wall elements are made of galvanised profile sheet metal or, in the thermally insulated version, of painted smooth sheet metal panels (RAL 9002, grey-white).
- Crane eyes as standard for safe transport to the installation site.
- On request with thermal insulation (50 mm) for walls and roof in mineral wool (ISO A - non-combustible) and heating for frost-free storage.
- Water law tested, one piece 5 mm spill pallet (to density 1.9 g/cm³) with easily removable hot dip galvanised grids (load capacity: 1250 kg/m²).
- With natural ventilation with a slit on 3 sides
- When a PE inliner is fitted: galvanised fluid guides all around ensure any leaked substances are safely diverted to the spill pallet.
- Door equipment: 1-wing in narrow version or 2-wing in wide version.
- 100 mm clearance for access underneath using a hand operated electric stacker.
- Natural ventilation provided by weather-protected, all round openings.
- Security lock for protection against unauthorised access.
- Precise roof drainage via the sides (front and back).
- Optionally with overvoltage protection.
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.
Guidelines for storing flammable liquids
(flash point ≤ 60 ° C, classes H226, H225 and H224)
- Observe distance from fire loads (mostly min. 10 m)
- Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
- Country-specific requirements for air exchange rate
- Specifications in accordance with HSG71
- Specifications in accordance with ATEX Directive 2014/34/EU
Product description
- For the storage of drums and IBCs on a small footprint for access close to production.
- Approved for storage of water-polluting and flammable substances.
- Steel frames and spill pallet are powder coated (RAL 7043, black-grey). The wall elements are made of galvanised profile sheet metal or, in the thermally insulated version, of painted smooth sheet metal panels (RAL 9002, grey-white).
- Crane eyes as standard for safe transport to the installation site.
- On request with thermal insulation (50 mm) for walls and roof in mineral wool (ISO A - non-combustible) and heating for frost-free storage.
- Water law tested, one piece 5 mm spill pallet (to density 1.9 g/cm³) with easily removable hot dip galvanised grids (load capacity: 1250 kg/m²).
- With natural ventilation with a slit on 3 sides
- When a PE inliner is fitted: galvanised fluid guides all around ensure any leaked substances are safely diverted to the spill pallet.
- Door equipment: 1-wing in narrow version or 2-wing in wide version.
- 100 mm clearance for access underneath using a hand operated electric stacker.
- Natural ventilation provided by weather-protected, all round openings.
- Security lock for protection against unauthorised access.
- Precise roof drainage via the sides (front and back).
- Optionally with overvoltage protection.
Structural analysis
The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.
Guidelines for storing flammable liquids
(flash point ≤ 60 ° C, classes H226, H225 and H224)
- Observe distance from fire loads (mostly min. 10 m)
- Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
- Country-specific requirements for air exchange rate
- Specifications in accordance with HSG71
- Specifications in accordance with ATEX Directive 2014/34/EU
Technical data
| Material | Steel |
| Door version | hinged door |
| Door design | 2 wing doors |
| Sump capacity [l] | 1323 |
| Surface | galvanized |
| Dimensions (without equipment) W x D x H [mm] | 2990 x 1890 x 2360 |
| Internal dimensions W x D x H [mm] | 2665 x 1630 x 1830 |
| Colour | Grey white |
| RAL Code | 9002 |
| Secondary colour | Grey |
| RAL Code 2 | 7.043 |
| Overall load capacity [kg] | 4000 |
| Certification / certificate | Dibt (Z-38.5-293) |
| Weight [kg] | 910 |
| Capacity IBC / CP / EP / drum | 2 / 2 / 3 / 8 |
Documents
Mon - Thu: 08:30 - 17:00 Fri: 08:30 - 16:00
- View your order history
- Save shopping list and basket
- Save preferred payment method for future orders
Give us a call or fill out the form and we will get back to you as soon as possible.
Calls are handled by our UK team. All sales are processed via our German parent company so are VAT* / tariff free where applicable. *Must be fully IE VAT registered
Use code DEN10 at checkout for 10% off ALL of our catalogue products. Cannot be combined with other promotions, discounts or other special prices. Does not apply to open quotations. IMPORTANT: our warehouse will close on the 17th of December, with the last date for dispatch being the 16th. It will reopen on the 2nd of January 2025.